Recomended 24Vdc power supply for clutches and brakes

MEAN WELL is one of the world’s few manufacturers dedicated to standard power supply products. It is ranked the 5th in global power supply (DC output) makers according to a report by Micro Technology released in March, 2019.  99% of MEAN WELL sales are of standard power supply products sold under the MEAN WELL brand name.  The other four companies’ products are ODM/OEM.

These power supplies are designed to get the best performance of your electromagnetic clutch and brake products.

MEAN WELL LRS-150 – 24

LRS-150 series is a 150 W single output enclosed type power supply with 30 mm of low profile design. Adopting the input of 115VAC or 230VAC (selectable by switch) , the entire series provides an output voltage line of 12V, 15V, 24V, 36V and 48V.

Mean Well LRS-150

In addition to the high efficiency up to 90%, the design of metallic mesh case enhances the heat dissipation of LRS-150 that the whole series operates from -30ºC through 70ºC under air convection without a fan.


  • Ac input range selectable by switch
  • Withstand 300Vac surge input for 5 second
  • Not load power consumption <0.5W
  • Miniature size and 1U low profile
  • High operating temperature up to 70 degree c
  • High efficiency, long life and high reliability
  • Protections: Short circuit / Overload / Over voltage /Over temperature

Here you can find it:


Mean Well NDR-240 is one economical slim 240W Din rail power supply series, adapt to be installed on TS-35/7.5 or TS-35/15 mounting rails. The body is designed 63mm in width, which allows space saving inside the cabinets. The entire series adopts the full range AC input from 90VAC to 264VAC and conforms to EN61000-3-2, the norm the European Union regulates for harmonic current.

Mean Well NDR-240


  • Universal AC input / Full range 
  • Built-in active
  • PFC functionProtections: Short circuit / Overload / Over voltage / Over temperature
  • Cooling by free air convection
  • Can be installed on DIN rail TS-35/7.5 or 15
  • UL 508 (industrial control equipment) approved
  • EN61000-6-2(EN50082-2) industrial immunity level
  • 100% full load burn-in test
  • 3 years warranty

Here you can find it

Write a Comment

Your email address will not be published. Required fields are marked *